This series of Reel Cutter CHM1700 is used to cut the paper roll into paper sheets. It adopts advanced technology of British and it is driven by AC servo motors, the high cutting speed reaches 300 cuts /min. And it can cut 8 paper rolls at one time.
It is also equipped with automatic deflection rectify and antistatic device. The paper feeding and delivering units are automatic with the hydraulic system. The human and machine interface system could make operation become much easy and more convenient.
Model |
|
CHM-1700 |
1. Type of cutting |
: |
Top blade rotary, bottom blade fixed |
2. weight of paper |
: |
60-550 GSM |
3..reel diameter |
: |
Max 1800mm (71") |
4. Finished width |
: |
Max 1700mm (66.9") |
5. Finished sheet-Length |
: |
Min.450-Max.1650 mm |
6. Num.of rolls cutting |
: |
2 rolls |
7. Cutting accuracy |
: |
±0.5mm(L ±0.1% (L≥1000mm) |
8. Max.speed of cutting |
: |
300cuts/min |
9. Max.cutting speed |
: |
300m/min |
10. Requirement of the air pressure |
: |
0.8MPa |
11. Voltage |
: |
AC380V/220Vx50Hz |
12. Total power: |
: |
29KW |
13. Accuracy of the roller paper sheet |
: |
±0.5mm(L ±0.1%(accelerate or decelerate). This depend on machine stable and operation when cutting. (cutting one paper roll, the cutting length is right ) |
14. Output |
: |
The real output depend on the material, and the weight of the paper, and right operate process |
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Dual Hydraulic shaft-less Unwind Station
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Unwinding Station With Cone Chuck
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Hydraulic Station
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Auto-EPC(Edge Paper Control) Sensor
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
De-curl unit
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Slitting Knife Unit
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Rotary Knife
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Coneyor Unit 1
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Coneyor Unit 2
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Auto Jogger System
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Cutting section:
1. Computer operation interface, easy to operate.
2. High precision special alloy steel knife
3. Cutting accuracy is at 0.5 tolerance allowed
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Paper feeding section:
1. Double limbs oil pressure shaftless paper rack
2. Auto tension control system
3. Auto paper edge guiding system
![](http://www.p-transchina.com/skin/blue/image/lazy.gif)
Electric control section:
1. PLC control system
2. AC servo driving motor
3. High precision encoder
4. High precision cutting.
5. Long endurance
2. Used for trimming and middle slitting
2. The single sheet outlet can be adjusted.
If you are interested please send quick enquiry for more information about machine.
http://www.chm-machinery.com/